Citrus pre-wash is an essential product for the pre-wash stage of car detailing. Formulated to break down dirt and grime on your vehicle’s surface, it ensures safe and effortless removal of contaminants when rinsed off with a pressure washer. This step not only preps your car for a more effective contact wash but also reduces the risk of scratches and swirls, protecting the condition of your vehicle’s paintwork in the long run.
How To Use Citrus Pre Wash
Using a pre-wash is a straightforward process that delivers instant, impressive results:
1. Dilute: Prepare the product to the recommended strength using our dilution calculator for precise measurements.
2. Apply: Spray it onto the lower third of your vehicle or focus on areas with heavy dirt and grime buildup.
3. Dwell: Allow the product to sit on the surface for a few minutes, being careful not to let it dry.
4. Rinse: Use a pressure washer to rinse off the pre-wash, effortlessly removing dirt and grime.
Once complete, your vehicle will have a prepared surface, ready for the snow foam and contact wash stages.
Do You Have To Use Citrus Pre Wash And Snow Foam?
While you don’t have to use both citrus pre-wash and snow foam during car cleaning, there are specific scenarios where one might be more suitable than the other. Here’s how to choose:
Citrus Pre-Wash
• When to Use: Best for heavily soiled vehicles, particularly in areas with stubborn dirt and grime.
• Application: Typically applied to the lower third of the vehicle, as this area tends to accumulate the most contaminants.
• Flexibility: Can be used on its own or layered under snow foam to boost cleaning power and extend dwell time.
• Dilution: Adjust the strength of the product according to the level of dirt on the vehicle using our calculator.
Snow Foam
• When to Use: Ideal for general pre-wash cleaning, covering the entire vehicle for a hands-free clean.
• Purpose: Softens dirt across all surfaces while providing a longer dwell time than citrus pre-wash.
• Combination: Works effectively after a citrus pre-wash application to ensure maximum dirt removal before the contact wash stage.
Recommendation
For extra dirty vehicles, use citrus pre-wash on the lower third of the car to tackle tough grime, followed by snow foam for full coverage and extended cleaning action. Together, they provide a highly effective pre-wash detailing routine that minimises the risk of scratches and prepares your car for the contact wash.
